When preparing your mix files it is best to provide as much information as possible. It is also a good idea to supply us with full track listing text file with correct spelling etc. to be included as CD text on your master.


The one thing that should be avoided is maximizing / limiting your mixes. When supplying mixes for mastering remove all level processing such as limiting etc. as the more headroom we have the better the result, in other words, for us less is more.


It can be helpful if you have a cross reference for the way you want your music to sound. Suggesting a known artist and providing a sample to compare sonically as a guide.

You may also supply different versions of mixes or separate instrument and vocal stems. By stems we mean that you can provided time aligned separate stereo files of rhythm, instruments, and vocals. Mastering from stems is a no compromise method however only supply stems that relate to any mix issues you may have. If you have any doubts just call us for advice.

When your files are ready you can use this secure yousendit link to send your files to us-


You can include a text file instructions list etc. with the files or send an e-mail containing all details.

Once Mastering is completed, we will email you a link containing your Mastered WAV files.

After the WAV files have been sent to you, it is possible to make small adjustments if you require them.

Accepted formats are:

-Wav & Aiff 24 bit Files. Accepted sampling rates are 44.1khz to 192khz-

- Audio CD-

- DAT tape-

- 1/2 Inch & 1/4 Inch Analog Tape-


 We have Dolby SR, A, and also DBX noise reduction units available. When providing analog tape please make sure appropriate alignment tones are included and stated. At the minimum tapes should include 1khz, 10Khz, & 100hz tones.


If you are the original owner of the recordings it's wise to investigate International Song Recording Codes - "ISRC".

In Australia they are available from ARIA via this website -


  Home                                     Preparation

  About Us                                Engineer

  Mastering                               Rates                   
  Equipment                             Contact Us